عربة الصهريج لنقل المواد الغذائية Letina C313FH

Letina-Berger - semi trailer tanker, with heating preparation (connections canter, heating channels under insulation, for maintaining tank temperature, suitable for connecting Webasto)


Semi trailer tank for the transport of food-grade and non-hazardous liquids, stainless steel tank with a capacity of approximately 31,000 liters, divided into 3 compartments (12,000 l + 6,300 l + 13,000 l), thermally insulated, non-pressurized tank.

TECHNICAL INFORMATION:
External length: 10,785 mm
Width: 2,550 mm
Height: 3,440 mm
Wheelbase: 4,700 mm
Fifth wheel height: 1,150 mm
Kingpin load capacity: 12,000 kg
Technically permissible mass: 39,000 kg
Unladen weight: 5,790 kg
Designated registration/operating mass: 35,000 kg
Technically permissible mass on each axle group: 27,000 kg
Designated registration/operating mass on each axle group: 24,000 kg
Tank
Made of AISI 304 (DIN 1.4301) high-quality stainless steel, with a filler shaft in each compartment.
Tank volume: 31,000 liters
Tank inner diameter: 2,004 mm
Number of chambers: 3 (12,000 l / 6,300 l / 13,000 l)
Tank support inner rings: stainless steel
Manholes:
3 x filling shafts, size DN500
4 x bolt closures
Each manhole cover with 1 safety valve
Manhole overflow box:
Located on top of the tanks
Stainless steel, insulated
2 x hinged lids, manually locked
Insulation and lining:
Body insulation: 50 mm polyurethane
Tank head insulation: 100 mm glass wool
Insulation lining: stainless steel
Bottom lining: fiberglass
Working pressure: Non-pressurized design
Thermometers: 3 x thermometers
Walkway: Aluminum, non-slip walkway along the tank Tanks and
around the manhole overflow boxes
Catwalk control:
Foldable stainless steel handrail, operated from the lower half of the access ladder
Ladder:
Stainless steel ladder with non-slip steps at the rear of the tank
Tank cleaning line CIP: Washing system with 5 independent balls,
1/2" ball valve, and DN50 stainless steel pipe
Hose protection barrier:
Bars to protect the cladding on the right and left sides of the tank
ATP certificate: Included in delivery
Bottom valve: DN100 with manual control
Drain valve: Butterfly valve DN100
Drain line: Stainless steel pipe DN100, with rear outlet
Chassis type: Berger Ecotrail – SATA10.5
Welded frame construction made of fine-grain steel S700, galvanized
Chassis
Axles: SAF axles, ET 120, integral disc brake 22.5"
Number of axles: 3
Axle lift: 1st axle liftable, Wabco, fully automatic; Lifting only while driving at speeds above 16 km/h
Braking system: Wabco EBS braking system, E Generation 2S/2M, spring-loaded parking brake with double release valve, conventional air suspension with rotary valve
Suspension: Air suspension
Tire brand/size: Goodyear (6x) Fuelmax T HL M+S 385/65 R 22.5
Tire pressure monitoring system: TPMS SCB-CTU (6 wheels with tire pressure monitoring sensors)
Alloy wheels: Alcoa LvL-ONE 11.75x22.5 ET 120
Spare wheel: Spare wheel with steel rim, GOODYEAR Fuelmax T HL M+S, 385/65 R22.5, spare wheel carrier in cable winch design in front of the first axle on the right
Chassis: SAF chassis 2x12 ton, with thrust compensation
Fenders/splash guards: Splash guards on all Fender-mounted protective devices
Bumper type: Fixed aluminum bumper according to UN ECE R58 regulation
Electrical system
Sockets on the front wall, 2x7-pin and 1x15-pin (DIN ISO 3731/12098)
24-volt lighting system, type Hella, multifunctional rear lighting (including rear fog light and reversing light)
2 rubber-armed clearance lights (LED)
2 front-wall clearance lights (LED)
4 pairs of side marker lights (LED)
Other features
Rear reflectors: Red reflective strip at the rear of the vehicle according to UN ECE R48 regulation
Side reflectors: White reflective strip along the sides of the vehicle according to UN ECE R48 regulation
Toolbox: PVC (600x415x460), rear left
Side protection: Permanently mounted, natural anodized aluminum
Colors
Chassis color: RAL 7016 Anthracite Gray
Dome color: RAL 7001 Silver Gray
Axle color: RAL 9005 Jet Black


Additional equipement:
• Heating preparation - connections canter, heating channels under insulation, for maintaining tank temperature, suitable for connecting Webasto
• Toolbox Type: 1 PVC toolbox (600x415x460), rear left
• Hose tube: 2 x Stainless steel tube / right side, Ø150mm, length 6m, 3 holders, openings on one side