MASTRAİLER TANKER
تم التحقق من هوية التاجر
متوفرة للبيع:
35 إعلانات
3 سنة في Autoline
تم فحص أرقام الهواتف
جديد صهريج نصف مقطورة Mas Trailer Tanker 2024 Stainless steel medium model
PDF
مشاركة
Facebook
WhatsApp
Viber
Telegram
هل أنت مهتم بالإعلان؟
1/26
PDF
مشاركة
Facebook
WhatsApp
Viber
Telegram
السعر:
عند الطلب
تقديم استفسار عن السعر
الاتصال بالبائع
الماركة:
Mas Trailer Tanker
الموديل:
2024 Stainless steel medium model
الفئة:
صهريج نصف مقطورة
سعة:
30000 لتر
الحمولة:
25500 كجم
الوزن الصافي:
7500 كجم
الوزن الإجمالي:
33000 كجم
الموقع:
تركيا KARATAY / KONYA
تاريخ النشر:
بالأمس
Autoline ID:
RR37752
المواصفات
ارتفاع صينية القطر:
1250 ملم
مقاييس عامة:
10850 متر × 2550 متر × 3750 متر
هيكل
الهيكل (الشاسيه):
من الصلب
صندوق الأدوات:
حامل للعجلة الاحتياطية:
عربة الصهريج
الفولاذ المقاوم للصدأ:
الفئة – 304
منصات هيدروليكية متنقلة:
عدد الفوهات:
2
ضغط الاختبار:
0.4 bar
عدد الأقسام:
1
سماكة جوانب الصهريج:
4 ملم
سمك نهايات الجدران:
4 ملم
سماكة الفواصل:
4 ملم
محاور
عدد المحاور:
3
نظام التعليق:
بضغط الهواء/بضغط الهواء
قاعدة العجلات:
1310 ملم
مقاسات الإطارات المطاطية:
385/65/r22,5
الفرامل:
طبلة
الفرامل
نظام الفرامل ذات التحكم الإلكتروني (EBS):
حالة المركبة
حالة المركبة:
جديد
خدمة تسليم السيارات
معلومات إضافية
اللون:
أبيض
هامة
إن هذا العرض يمكن الحصول من خلاله على المعلومات الأولية فقط. أما التفاصيل المتعلقة، فيرجى الاتصال بالبائع.
نصائح للشراء
معلومات الاتصال بالبائع
الاشتراك بصفحة البائع
عنوان
تركيا, 42050 BÜ, KARATAY / KONYA, FEVZİÇAKMAK MAH. 10662. SK. NO: 19 D
التوقيت المحلي الخاص بالبائع:
01:23 (+03)
إرسال الرسالة
معلومات الاتصال بالبائع
MASTRAİLER TANKER
تركيا
3 سنة في Autoline
4.9
44 مراجعات
الاشتراك بصفحة البائع
+90 542 312...
عرض
+90 542 312 86 28
اسأل البائع
PDF
مشاركة
Facebook
WhatsApp
Viber
Telegram
بيع ماكينات أم مركبات؟
يمكنك القيام بذلك معنا!
إعلانات مماثلة
€31,500
≈ $33,990
≈ AED 124,900
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
7500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€80,000
≈ $86,310
≈ AED 317,100
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
5500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€60,000
≈ $64,730
≈ AED 237,800
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
7500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€71,500
≈ $77,140
≈ AED 283,400
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
5500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
5500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
7500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
7500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
5400 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€33,500
≈ $36,140
≈ AED 132,800
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
7500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
7500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€55,000
≈ $59,340
≈ AED 218,000
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
7500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€40,000
≈ $43,160
≈ AED 158,600
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
7500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
€90,000
≈ $97,100
≈ AED 356,800
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
5400 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
السعر عند الطلب
حمولة
25500 كجم
سعة
30000 لتر
نظام التعليق
بضغط الهواء/بضغط الهواء
الوزن الصافي
5500 كجم
عدد المحاور
3
ارتفاع صينية القطر
1250 ملم
تركيا، KARATAY / KONYA
الاتصال بالبائع
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm
CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 3 Compartments
Tank capacity between 30.000 lt & 36.000 lt
4mm chrome stainless steel sheet
Axles
3 local axles, each with a carrying capacity of 12 tons, are used.
It has air suspension.
The front axle is lifted and can be controlled from the driver's cabin.
BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.
ELECTRICAL SYSTEM
Saba brand
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake safety warning lights and signal lights are installed.
There will be 2 tail and stop combination lights.
2 turn signal combination lamps will be installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.
PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM
TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)
KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.
PAINT:
Since chrome tankers have stainless steel sheet, they do not require painting, but if painting is desired, the following processes are carried out respectively
All parts are carefully cleaned before painting.
An initial protective primer is applied and epoxy is used for the coating.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If other color is requested, it will be reflected as extra cost.
KURTUBA manhole cover:
The lower plate (stainless chrome) is welded to the upper part of the tanker and mounted on the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Mushroom type vents are mounted on them.
KURTUBA Valve :
3" flanged ball valve is made of chrome stainless material and protected against corrosion. The ball is plastered with stainless material. Liquid and heat resistant Teflon material is used in sealing parts.
ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses
Note: Please contact us for your production requests in special sizes.
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm
CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 3 Compartments
Tank capacity between 30.000 lt & 36.000 lt
4mm chrome stainless steel sheet
Axles
3 local axles, each with a carrying capacity of 12 tons, are used.
It has air suspension.
The front axle is lifted and can be controlled from the driver's cabin.
BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.
ELECTRICAL SYSTEM
Saba brand
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake safety warning lights and signal lights are installed.
There will be 2 tail and stop combination lights.
2 turn signal combination lamps will be installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.
PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM
TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)
KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.
PAINT:
Since chrome tankers have stainless steel sheet, they do not require painting, but if painting is desired, the following processes are carried out respectively
All parts are carefully cleaned before painting.
An initial protective primer is applied and epoxy is used for the coating.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If other color is requested, it will be reflected as extra cost.
KURTUBA manhole cover:
The lower plate (stainless chrome) is welded to the upper part of the tanker and mounted on the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Mushroom type vents are mounted on them.
KURTUBA Valve :
3" flanged ball valve is made of chrome stainless material and protected against corrosion. The ball is plastered with stainless material. Liquid and heat resistant Teflon material is used in sealing parts.
ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses
Note: Please contact us for your production requests in special sizes.